Bucket & blade
- Crack repair and gusseting
- Cutting-edge replacement
- Tooth bar and tip-up repair
- Quick-attach plate work
Mobile service Mobile service · Fraser Valley
Equipment Welding Services
Onboard MIG and stick rig for buckets, blades, frames, and on-site fabrication. A small fab shop on wheels at your jobsite. Chilliwack, Abbotsford, Mission, Agassiz, Hope.
- Red Seal certified
- Honest estimate first
- Goal: fix it first time
- 15+ brands serviced
What we do here
On Site Welding Services
Welding Services let us repair damaged iron right where it sits. Bucket cracks, frame welds, blade repairs, mounting plates, and general fabrication on the jobsite. We carry an onboard welding rig (stick and MIG) plus cutting and grinding equipment, so the truck is essentially a small fab shop on wheels. Hardfacing and wear-plate work extends the life of buckets and high-wear components instead of replacing them. Note: structural welding on regulated equipment, pressure vessels, and lifting components is excluded by our insurance and shop license, for those repairs we'll point you to the right structural welder.
Got it. Jordan will call you back.
We'll reach out at the number you provided.
Need us sooner? Call 778-823-9813.
Mobile welding scope
What we weld in the field
Common ag and construction welding done on-site. Regulated structural and pressure work is referred to a certified shop.
Frame & structural
- Cracked weldments (non-pressure)
- Mounting plate and bracket work
- Implement frame repair
- Trailer and equipment hitch repair
Wear protection
- Hardfacing on high-wear surfaces
- Wear-plate application
- Edge build-up on cutting equipment
- Extends component life vs. replace
Brands we service Specialized in John Deere · 15+ brands
Specialized in mobile John Deere equipment repair. Need hydraulic repair on-site, skid steer repair, or a preventative maintenance package? We cover those too.
Steel work people call us back for
Field welds, brackets, hitches, fab one-offs. Good work travels fast in the trades, and we appreciate the repeat calls.
How a service call works
From the call to the weld, on-site
Field welds, brackets, hitches, and one-off fab. Portable rig where the iron sits.
- 01
Call or Contact JSD
Photos of the failure, dimensions, and material if you know it. We confirm what's possible on-site versus shop work before we book.
Honest scope on the call
- 02
Portable rig at your jobsite
Welder, grinders, clamps, and common stock on the truck. Stick, MIG, and structural work done where the equipment is parked.
Stick + MIG - 03
Inspected, work resumes
Welds dressed and inspected before we leave. Repair holds up under the same load that broke the original.
Workmanship guaranteed
What rolls onto your jobsite
The service truck is the shop
Our goal is to fix it the first time, so the truck arrives with the tools and common parts and we don't have to drive back.
- John Deere Service Advisor
- Yanmar engine software
- Onboard welding rig
- Pressure & flow gauges
- Hand & power tools
- Common parts & filtration
Why Choose JSD Equipment
A small fab shop on wheels
Onboard MIG and stick rig, cutting and grinding equipment, and the experience to repair iron right where it sits. Bucket cracks, frame welds, blade tip-up, hardfacing, common on tractors, skid steers, and excavators in the Fraser Valley. Note: regulated structural welding on pressure vessels and certified lifting components is outside our insurance scope; we'll refer you to a structural welder for those.
Where we work
Mobile across the entire Fraser Valley
We come to your job site, farm, or shop. If you're east of the Lower Mainland and have equipment that needs work, we can get to you.
Outside this list? Give us a call, we'll let you know if we can help. See the full interactive map →
Need us today?
Emergency breakdowns get priority response. Most calls placed before noon are seen the same day*.
Call 778-823-9813 Cities we serve
- Chilliwack
- Agassiz / Kent
- Abbotsford
- Mission
- Hope
- FVRD outer areas
Welding Services FAQ
Common questions
More questions? Call 778-823-9813, the same person answering will be the one doing the work.
Do you do structural welding on lifting equipment?
No, pressure vessels and certified lifting components are outside our insurance scope. We'll refer you to a certified structural welder for those.
What welding processes do you carry on the truck?
Stick and MIG. Both are standard for repair work on equipment iron, blades, buckets, frames, and brackets. Plasma cutting and grinding gear is on the truck too.
Can you fabricate parts on-site?
Yes. Mounting plates, brackets, gussets, hitch and frame work, common fabrication is all in scope. For complex assemblies we'll fabricate at the shop and install on-site.
Will hardfacing actually extend bucket life?
Significantly, yes. Hardfacing the wear edges of a bucket, blade, or wear plate is a fraction of replacement cost and typically multiplies the component's service life. Worth doing every time the wear shows up.
What metals can you weld on-site?
Mild steel and most equipment-grade steels, typical bucket, frame, blade, and bracket material. AR400 and AR450 wear plate are in scope. We don't carry aluminum or stainless TIG gear; if your repair is aluminum (lift booms, hopper bodies), we'll refer you to a shop that specializes.
How long does a typical bucket crack repair take?
Most bucket crack repairs run 2-4 hours on-site once we arrive, depending on the length of the crack, accessibility, and whether gusseting is needed. Frame and bracket work is similar. We give a realistic time estimate on the call before we dispatch the truck.
Do you weld outdoors or in the rain?
Stick welding tolerates weather better than MIG, so light rain is workable for most stick repairs. Heavy rain or wind needs a tarp or shelter we set up on-site. We won't weld in conditions that compromise the bead, we'll call it and reschedule before doing substandard work.
Do you warranty the welding work?
Yes. Workmanship is guaranteed against defects in the bead, penetration, and prep. We don't warranty against re-cracking from continued misuse, operator damage, or running a worn-out component past its service life; that's covered as a separate repair.
How is on-site welding priced?
Standard $135/hr labor, $160 callout fee, 3-hour minimum, same as any other service call. Consumables (rod, MIG wire, hardfacing) and specialty plate are billed at cost. Pricing is confirmed before any work starts.
Don't lose another day
Equipment down? Let's get it running.
Tell us what's wrong over the phone, we'll give you a free diagnosis and an honest estimate. Our goal is to fix it the first time, on-site.