Mobile service Mobile service · Fraser Valley

Equipment Inspections

Honest, written assessments before you buy, before peak season, or before a compliance check. Diagnostic software, hours verification, hydraulic and engine condition. Fraser Valley wide.

  • Red Seal certified
  • Honest estimate first
  • Goal: fix it first time
  • 15+ brands serviced
★★★★★ 5.0 · 16 Google reviews · Trusted across the Fraser Valley
What we do here

Heavy & Agricultural Equipment Inspections

Equipment Inspections give you an honest, third-party assessment of a piece of machinery before you buy it, before peak season, or before a compliance check. We walk through the equipment with the diagnostic software hooked up, document hours and service history where we can find it, evaluate hydraulics and engine condition, check structural and wear-prone components, and flag anything that's a near-term repair concern. You get a written report with photos. Useful for buyers who want a non-dealership opinion before committing, owners getting ready for harvest or a long build, and fleet operators preparing for a safety audit.

Quick estimate

Can't talk right now?

Send the details. Jordan will call you back, usually within the hour.

Or call 778-823-9813 for breakdowns.

Certified · Insured · Trusted Proudly serving the Fraser Valley since 2019
John Deere Certified Technician Red Seal Interprovincial Standard WorkSafeBC certified Google 5-Star Rated
When inspections are worth it

Three situations we inspect for

We're not the seller and not the dealer. You get an opinion you can act on, with a written report and photos.

John Deere tractor pulling an air seeder — the kind of used farm equipment JSD inspects before purchase.

Pre-purchase

  • Condition assessment before you buy
  • Hours verification and history check
  • Diagnostic software pull on fault history
  • Hidden-issue and red-flag report
Tractor working a green crop field — pre-season checks before equipment hits the field.

Pre-season

  • Harvest readiness for ag fleets
  • Build-cycle prep for contractors
  • Snow-season prep on plows and blowers
  • Post-storage start-up checks
Tracked excavator parked on rocky ground with the bucket down for inspection.

Compliance & audit

  • Safety-audit preparation
  • Documented condition reports
  • Fleet records for insurance reviews
  • Pre-rental return verification
Common reasons people call

What you might be calling about

Concrete failure scenarios we see week-in, week-out. If your equipment looks like one of these, we've fixed it before, and we'll give you a likely diagnosis on the phone before we leave the shop.

  1. 01

    Buying a used tractor and want a non-dealer opinion

    We walk the equipment with the diagnostic software hooked up, document hours and any history we can find, evaluate hydraulic and engine condition, and flag near-term repair concerns.

  2. 02

    Pre-harvest readiness on the ag fleet

    Catch problems while there's still time to fix them. We inspect fluids, filters, belts, hoses, hydraulics, and engine condition, and quote the work so you can plan it before harvest.

  3. 03

    Insurance or safety audit coming up

    Documented condition reports and equipment-specific findings to support insurance reviews, fleet safety audits, and rental-return verification.

  4. 04

    Pre-rental return condition check

    Verify the equipment is in good return condition, document the state on paper, and catch anything that should be addressed before you lose the deposit.

Brands we service Specialized in John Deere · 15+ brands
John Deere logoBobcat logoCaterpillar logoKubota logoVolvo logoJCB logoCase logoYanmar logoGenie logoJLG logoDitch Witch logoToro logoMultiquip logoCon-X logoVentrac logo

Specialized in mobile John Deere equipment repair. Need hydraulic repair on-site, skid steer repair, or a preventative maintenance package? We cover those too.

Trusted by buyers and operators alike

Pre-purchase, insurance, annual checks. Honest reports keep them coming back when the next machine is on the line.

See all on Google
  • C
    Corey Rheaume 1 month ago

    Jordan was a pleasure to work with, his professionalism and knowledge of my Bobcat was great. He even checked a few things that weren't even in the scheduled visit. Competitive and fair prices. Got me back in my machine the same day. Great guy all around.

  • M
    Mirza 3 months ago

    I've known Jordan for a bit now, he's the guy you call when engines give up on life. Super reliable, shows up on time. My buddies rave about how he fixed their rigs without ripping them off, always straight-up honest. Five stars!

  • M
    M -TM Canada 9 months ago

    Jordan helped us with a complex hydraulic issue on our motorhome. His work was precise, efficient, and clearly based on deep expertise. It's rare to meet someone in the repair business you feel you can truly trust 100%. With Jordan, we never had a moment's doubt.

  • R
    Ricardo 6 months ago

    Jordan took care of my concrete grinder! He fixed a problem I didn't even know of that was bothering me all summer long. SUPER communicative and on the ball. Fixed my issue in less than 30 min. Unreal service and super friendly guy.

  • W
    Wilson Mah a year ago

    Intermittent stalling issue on my Kubota generator. Reached out to Jordan on a Sunday night, he got back to me Monday morning and diagnosed and fixed my problem that morning. Extremely knowledgeable, communicates well, pricing is very fair.

  • R
    Robert Crawford a year ago

    Jordan is a straight up honest man. Helped me out on my John Deere stand-on mower and didn't try to just throw parts to fix it. Very honest and his shop rate is very good. Would highly recommend this company.

  • J
    Jeff Vrieselaar a year ago

    JSD has been great to deal with! Jordan provides friendly professional service along with great rates. He has worked on our tractors and skidsteer, doing things right but also with a realistic approach as to not break the pocketbook.

  • J
    Jeff Soch a year ago

    Jordan has been helping us with maintenance of our various commercial equipment ranging from excavators to tow-behind compressors. Always prompt, reliable and straightforward to deal with. Highly recommend Jordan.

  • T
    Tom Mealey a year ago

    Thorough, knowledgeable, and invested mechanic. Jordan has worked on our fleet of equipment for 4 years and provided excellent service. He takes the time to investigate, report on, and repair our fleet as if it were his own.

  • J
    Jim Pyke a year ago

    Jordan did a fantastic job when he replaced the clutch on my tractor. He is very personable and knowledgeable in his trade. I would highly recommend him for any repair work.

How a service call works

Booked, inspected, reported

Pre-purchase, insurance, or annual. A real technician's eyes on the iron, with a written report you can act on.

  1. 01

    Call or Contact JSD

    Pre-purchase, insurance, or annual: tell us what the report needs to cover. We confirm scope and travel before we book.

    Free quote on the call
    Jordan Bijl of JSD Equipment standing in front of his mobile service truck.
  2. 02

    On-site multi-system check

    Engine, hydraulics, electrical, undercarriage, and operating systems checked under load. Fault codes pulled with OEM-grade scan tools.

    Hydraulic + engine + electrical
    Dozers and excavators lined up in an equipment yard.
  3. 03

    Written report, same day

    Report with findings, severity, and an honest repair-or-walk recommendation. Photos and fault codes included so you can act with confidence.

    Photos + fault codes attached
    John Deere compact tractor with loader parked beside a farm shed.
What rolls onto your jobsite

The service truck is the shop

Our goal is to fix it the first time, so the truck arrives with the tools and common parts and we don't have to drive back.

Diagnostic scan tool hooked up in an engine bay.
Diagnostics

Factory-grade JD Service Advisor + Yanmar engine software, on-site

Welder running a bead in a shower of sparks.
Welding

Onboard MIG/stick rig for buckets, frames, and structural work

Chrome socket set laid out — hand tools carried on the service truck.
Repair

Hand and power tools, hydraulic gear, common parts on the truck

Fresh oil being poured into an engine during service.
Maintenance

Baldwin and Wix filtration, fluid changes, scheduled service

  • John Deere Service Advisor
  • Yanmar engine software
  • Onboard welding rig
  • Pressure & flow gauges
  • Hand & power tools
  • Common parts & filtration

Why Choose JSD Equipment

An honest opinion you can take to the bank

We're not the seller and not the dealer, so the report goes where the equipment is, not where someone wants the deal to go. Diagnostic software pulled, hours verified, hydraulics and engine condition evaluated, structural and wear components checked, near-term repair concerns flagged. Written report with photos so you have something to negotiate or plan around.

Where we work

Mobile across the entire Fraser Valley

We come to your job site, farm, or shop. If you're east of the Lower Mainland and have equipment that needs work, we can get to you.

Outside this list? Give us a call, we'll let you know if we can help. See the full interactive map →

Need us today?

Emergency breakdowns get priority response. Most calls placed before noon are seen the same day*.

Call 778-823-9813
Cities we serve
  • Chilliwack
  • Agassiz / Kent
  • Abbotsford
  • Mission
  • Hope
  • FVRD outer areas
  • Mon-Fri · 8:00 am - 4:30 pm
  • After-hours · situational support
Equipment Inspections FAQ

Common questions

More questions? Call 778-823-9813, the same person answering will be the one doing the work.

How long does an inspection take?

Most equipment inspections take 1.5 to 3 hours on-site, plus the time to write up the report. Big-frame ag tractors and full-size excavators take longer. We'll quote a realistic time on the phone before booking.

Do I get the report in writing?

Yes. Every inspection comes with a written report including findings, condition photos, fault-code summary where applicable, and recommendations. Delivered by email within 1-2 business days of the visit.

Will you negotiate with the seller for me?

No, we provide the assessment and the report; the negotiation is yours. The report gives you the documented basis to push back on price or walk away.

Can you inspect equipment that's already at a remote site?

Yes, anywhere in our service area (Chilliwack, Abbotsford, Mission, Agassiz, Hope, plus surrounding FVRD). Fuel surcharge by zone applies for inspections outside Chilliwack.

Don't lose another day

Equipment down? Let's get it running.

Tell us what's wrong over the phone, we'll give you a free diagnosis and an honest estimate. Our goal is to fix it the first time, on-site.

Call 778-823-9813 Email [email protected] Workmanship guaranteed · Free phone diagnosis · Honest pricing
Call 778-823-9813